xiehe model

Do you know the purpose of rapid prototype processing and the role of grinding? Next, a brief introduction will be given by the Xiehe rapid prototype processing factory.

Prototype model processing is a direct and effective way to verify the feasibility of the product and find out product design defects, so as to make targeted improvements to the defects. Only when the prototype model has no problems can it be used as the basis for mold opening. Usually, it is also necessary to carry out small-batch complex mold testing, investment promotion and even inspection of the ease of assembly of the product in future mass production.

  The main purpose:

1. Appearance prototype: It is mainly used to test the feasibility analysis and judgment of mass production processes such as product appearance size, color matching, material matching, cost evaluation, market research, and exhibitions.

2. Structural prototype: mainly used for coordination between internal assembly structures of products, material strength analysis, performance testing, cost evaluation, new product investment promotion, etc., thereby greatly reducing the risk of direct mold opening.

3. Vacuum compound mold: It is mainly used for performance testing of small batches of new products, further improving the feasibility of mass production of new products, and can also be used for investment promotion of new products.

The polishing process has three main functions:

1. For the substrate, it is used to remove burrs, oil and dust on the surface of the substrate.

2. For the surface that has been scraped with putty, the surface is generally rough, and it needs to be sanded to obtain a relatively flat surface, so grinding can reduce the roughness of the workpiece surface.

3. Enhance the adhesion of the coating. Before spraying a new paint film, it is generally necessary to polish the old paint film layer after hard drying, because the paint has poor adhesion on an excessively smooth surface, and the mechanical adhesion of the coating can be enhanced after sanding.

The above content is the use of rapid prototype processing and the role of grinding introduced by the Xiehe rapid prototype processing manufacturer. I hope it can be helpful to everyone.